Automatic Slicing Dicing Machine DAS110

Automatic Coring Machine DAR810

Automatic Coring Machine
DAR806

3.7Kw High power motor + mechanical spindle

• 30mm thick cut possible
• Multi-gang blade load possible
• Less vibration = high accuracy cut

Index unit is 0.001mm

• Highly precise cutoff which isn‘t also inferior to the dicing saw

θ axis movement is loaded

• Cut 2ch by one work set
• Automatic alignment possible

Automation 1：Auto alignment

• Machine searches the cut point
• Troublesome adjustment work is unnecessary

Automation 2：Auto dressing

• Dress movement is carried out automatically
• Always keeping the point of a blade in good condition, it's possible to cut stably

Automation 3：Auto set-up

• The wear amount of the blade is automatically detected by the machine.
• It's corrected automatically so that the location of the work and the blade may always become most suitable.

Automation 4：Automatic work handling system (special-equipment)

• It‘s possible to connect a carrier system with a stock function.　
• Saves manpower

2.2Kw High power spindle

• Multi-gang blade load possible
• Less vibration = high accuracy cut

Index unit is 0.001mm

• Highly precise cutoff is possible

In-house development of a core drill

• It‘s possible to propose coring application

Automation 1：Auto alignment

• The machine searches coring point automatically.
• Troublesome adjustment is unnecessary

Automation 2：Auto-dressing

• Dress movement is carried out automatically

Automation 3: Auto set-up

• The wear amount of the blade is automatically detected by the machine.
• It‘s corrected automatically so that the location of the work and the blade may always become most suitable.

Automation 4： Automatic work handling system (special-equipment)

• It‘s possible to connect a carrier system with a stock function.　
• Saves manpower

Compact model specialized in small size production

• Compact design of installation area 700 (W) x 850 (D)
• Price reduction is achieved by optimizing the function.

Indexing unit is 0.001mm

• Even if it's small, high perfermance has been kept
• The precision equal to the high level coring machine is achieved.

In-house development of a core drill

• It's possible to propose application.

With an ultrasonic spindle

• It is processed by a top of cor drill with ultarasonic vibration of 40 kHZ.

* Chipping and wall roughness reduction have been improved by cataclastic effect produced by superspeed microvibration.

* Tool clogging is reduced by cavitation effect and the tool life expectancy was put off.

DAS110

DLS6160/6165

DAS-W65N

DAR810